Removing The Thermal Switch - Canon NP6251 Service Manual

CHAPTER 6 FIXING SYSTEM

10. Removing the Thermal Switch

1) Slide out the fixing/feeding unit from the copier.
2) Remove the fixing/feeding assembly front cover.
3) Remove the flywheel.
4) Remove the fixing assembly upper cover and the stay cover.
5) Remove the fixing web. Remove the mounting screw
6) Remove the mounting screw
assembly holder
7) Remove the four mounting screws
8) Remove the two mounting screws, and remove the thermal switch.
11. Removing the Main Thermistor (TH1)
1) Slide out the fixing/feeding unit from the copier.
2) Remove the fixing/feeding assembly front cover.
3) Remove the fixing assembly upper cover.
4) Remove the web.
5) Remove the mounting screw
6-30
COPYRIGHT © 1997 CANON INC.
and faston
.
, and remove the thermal switch assembly.
Figure 6-222
, and remove the oil pan
Figure 6-223
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and remove the oil pan
; then, remove the thermal switch
.
.