Removing The Holding Tray Paper Jogging Solenoid - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
4) Remove the mounting screw

18. Removing the Holding Tray Paper Jogging Solenoid

1) Remove the side guide plate.
2) With the paper jogging guide plate fully open, mark the position of the paper jogging
guide plate assembly with a pencil or the like.
3) Remove the three mounting screws
remove the front guide plate assembly
5-114
COPYRIGHT © 1997 CANON INC.
, and remove the motor assembly
Figure 5-896
, and disconnect the connector
.
Figure 5-897
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
; then,