CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
H. Main Drive Assembly (drum/developing)
1. Construction
Figure 7-445
2. Removing
1) Open the front door, and slide out the process unit, fixing/feeding unit, and holding
tray assembly about 10 cm from the copier.
2) Remove the rear cover.
3) Remove the high-voltage PCB and the high-voltage transformer assembly.
4) Remove the waste toner bottle.
5) Remove the cleaner fan, feeding fan, and developing fan.
6) Remove the fixing/waste toner drive assembly.
7-38
COPYRIGHT © 1997 CANON INC.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)