Canon NP6251 Service Manual page 564

  
  
11. Routing the Timing Belt of the Side Guide (multifeeder assembly)
Butt the rack plate of the multifeeder against section A (open condition).
Move the slide volume in the direction of B, and attach the timing belt on the pulley.
12. Adjusting the Position of the Solenoid (delivery paper deflecting plate
solenoid)
Fix the delivery paper deflecting plate solenoid temporarily in place with a mounting
screw; then, move down the lever
deflecting plate drive solenoid
screw .
COPYRIGHT © 1997 CANON INC.
Timing belt
Rack plate
Pulley
B
Slide volume
Figure 11-236
in the direction of arrow A, push the delivery
B in the direction of arrow B, and tighten the mounting
A
Figure 11-237
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
Pulley
Section A
B
11-33