3. Removing the Fixing/Feeding Assembly Locking Assembly
1) Slide the fixing/feeding assembly unit to the front and out of the copier.
2) Remove the two mounting screws
, and remove the fixing/feeding locking assembly
4. Removing the External Delivery Roller
1) Slide the fixing/feeding assembly unit to the front and out of the copier.
2) Remove the fixing/feeding assembly front cover.
3) Remove the two mounting screws
COPYRIGHT © 1997 CANON INC.
and E-ring
Figure 6-235
, and remove the delivery roller guide
Figure 6-236
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
; then, disconnect the connector
.
.
6-37