CHAPTER 6 FIXING SYSTEM
16. Adjusting the Fixing Clutch
If you have replaced any of its associated parts, adjust the fixing clutch by turning the
set screw
so that the gap between the 41T gear
and the control ring
is 0.1 to
0.3 mm (equivalent of four sheets of 64 g/m2 plain paper).
Figure 6-230
6-34
COPYRIGHT © 1997 CANON INC.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)