Removing The Deck Main Motor (M101) - Canon NP6251 Service Manual

Hide thumbs Also See for NP6251:

Table of Contents

CHAPTER 8 PAPER DECK-A1

3. Removing the Deck Main Motor (M101)

1) Detach the deck from the copier; then, remove the six screws, and remove the rear

2) Disconnect the two connectors

deck main motor

motor spindle.)

, and remove the four screws

. (At this time, take care not to damage the gear at the end of the

Figure 8-402

CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

, and remove the

Table of Contents