Canon NP6251 Service Manual page 85

CHAPTER 3 EXPOSURE SYSTEM
Reference:
If two or more mode is selected, the scanner is controlled based on the minimum
value of the sizes which have been measured.
The microprocessor exerts control based on the size of the original when any of the
following modes has been selected:
• RDF in use
• Original frame
erase mode
3-10
COPYRIGHT © 1997 CANON INC.
Mode
Size of original detected by feeder
Size of original specified by user
Table 3-302
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Size used