Paper Deflecting Plate Drive Solenoid; Removing The Side Guide Plate Assembly - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
14. Positioning the Holding Tray Paper Deflecting Plate Drive Solenoid
Install the solenoid so that its stroke (distance between rubber silencer and solenoid
edge) is 5.0 ±0.3 mm.

15. Removing the Side Guide Plate Assembly

1) Mark the position of the side guide plate with a pencil or the like. (See Figure 5-901.)
2) Remove the two mounting screws
remove the side guide plate assembly
5-112
COPYRIGHT © 1997 CANON INC.
Figure 5-892
, and disconnect the two connectors; then,
.
Figure 5-893
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)