Orientation Of The Deck Pickup Feeding Roller - Canon iR2200 Service Handbook

CHAPTER 3 STANDARDS AND ADJUSTMENTS
5.6 Orientation of the Deck Pickup/Feeding Roller
When mounting the deck pickup/feeding
roller [1], be sure that the belt pulley [2] is
toward the front of the machine.
The pickup/feeding roller rubber, on the
other hand, may be attached to the pickup/
feeding roller shaft in either orientation.
5.7 Adjusting the Deck Separation Roller Pressure
If double feeding or pickup failure occurs
when the deck is used as the source of pa-
per, move the position of the pressure spring
[2] of the deck separation roller [1].
• If pickup failure occurs, move the
spring in the direction of arrow A.
• If double feeding occurs, move the
spring in the direction of arrow B.
3-20
[2]
F03-506-01
[1]
A
B
[2]
F03-507-01
[1]