Multifeeder Assembly - Canon NP6621 Service Manual

B. Multifeeder Assembly
1. Removing the Multifeeder Pick-up
Roller Unit
1) Open the right door.
2) Remove the E-ring
.
3) Remove the two screws
Figure 4-309
4) Remove the screw
cover .
5
4
Figure 4-310
COPYRIGHT © 1998 CANON INC.
, and pull out the bushing
.
1
2
3
, and remove the roller
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
5) Shift the multifeeder pick-up roller unit
ward the rear, and remove it.
Figure 4-311
2. Removing the Multifeeder Pick-Up
Roller
1) Remove the multifeeder pick-up roller unit. (See
"Removing the Multifeeder Pick-Up Roller Unit.")
2) Remove the stop ring (plastic)
the pick-up roller
Caution:
Take care not to lose the pin from the rear.
Figure 4-312
MECHANICAL SYSTEM
6
, and remove
together with its collar.
1 2
4–17
to-