Multifeeder Assembly; Removing The Multifeeder Assembly; Removing The Multifeeder Pick-Up Roller/Separation Pad - Canon NP6330 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
B. Multifeeder Assembly

1. Removing the Multifeeder Assembly

1) Remove the multifeeder inside cover and the right cover.
2) Disconnect the connector
3) Remove the four screws

2. Removing the Multifeeder Pick-Up Roller/Separation Pad

1) Remove the multifeeder assembly.
2) Remove the stop ring
3) While pushing down the separation pad
5-56
.
, and remove the multifeeder assembly
Figure 5-721
.
Figure 5-722
COPYRIGHT © 1997 CANON INC.
, remove the pick-up roller
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.