Pre-Cut Tabs; Envelopes - Xerox ColorQube 9201 User Manual

Media Types

Pre-Cut Tabs

Tabs are used as dividers in documents. Your device can accommodate tabs with 1 to 10 tabs and
weights of up to 200 gsm (53 lb).
• Do not use tabs with bent corners.
They can cause feeding related
problems. If a tab is bent, remove it
from the set and replace it with an
undamaged tab in the same position.
• Tabs can only be loaded into Tray 4
(Bypass).
• The tabs must be loaded with the tab
1 on the top, with the tab to the left.
• Use the Special Pages, Inserts option
in Copy or the Printer Driver to
program inserts where the tabs are required. Refer to the

Envelopes

Printing on envelopes is available using
Tray 4 (Bypass) only. Envelopes should not
be used in Trays 1, 2, 3, 5 or 6 (Inserter).
• Place the envelopes in Tray 4 (Bypass)
face down.
• Envelopes must always be fed Short
Edge Feed (SEF).
• The flaps should ALWAYS be closed.
Flap edge should be to the left or
towards the front.
Your device can feed the following types of envelopes:
Acceptable Types
• Diamond/Banker
• Wallet
• Business envelopes with diagonal seams
• Baronial
• Booklet
Weight
• Lightweight and medium weight
232 ColorQube™ 9201/9202/9203
Paper and Media
Copy or Print guide for information.