Audio Tones - Xerox ColorQube 9201 User Manual

Device Settings
• Job Status Pathway Default is used to select the default selections which display when the Job
Status button is selected. The Selected Tab, the Active Jobs View and the Completed Jobs View can
be customized. Select each option and choose the setting required from the menu shown.
Measurements
This utility enables you to set the device to
display measurements either in
millimeters or inches, and the numeric
separator as a period (full stop) or a
comma.
• Units is used to select Inches or MM
(millimeters) as the unit of measure.
• Numeric Separator is used to define
which character is used to separate
numbers, select Comma or Period.
Paper Size Preference
This option is used to select the most frequently used paper size formats.
• Inches for formats such as 8.5x11" or 11x17".
• Metric for formats such as A4 or A3.

Audio Tones

The device generates three types of audio
tones to notify the user of an event that
has occurred at the device. Use this feature
to switch off or adjust the volume of each
of the tones.
• Fault Tone sounds when there is a
fault on the device. Select High,
Medium, Low or Off. Use the Test
option to hear the tone selected.
• Conflict Tone sounds when an
incorrect touch screen selection has
been made. Select High, Medium, Low or Off. Use the Test option to hear the tone selected.
• Selection Tone sounds when the device accepts your selection. Select High, Medium, Low or Off.
Use the Test option to hear the tone selected.
256 ColorQube™ 9201/9202/9203
Administration and Accounting