Xerox ColorQube 9201 User Manual page 263

Out of Staples Options
If your device has a finisher you can set how the device handles a stapling job when the stapler runs
out of staples.
• Complete Job Without Stapling instructs the device to continue the job without stapling.
• Fault/Hold Job instructs the device to hold the job in the job list for the user. If a job has already
started and the staples run out, a fault is declared.
Output Location
This option determines the output location
for non-finished jobs. The output location
for finished jobs is determined by the
system.
System generated reports are sent to the
Top Tray automatically.
The following options are available for
Copy, Print and Fax jobs:
• Top Tray delivers the output to the
Top tray.
Stacker Tray delivers the specified job output to the Stacker Tray.
•
Within Job Offsetting
The device offsets every set from the previous set, making it easier to separate the sets. There maybe
occasions when you require the job to stack without offsetting. Use this feature to enable or disable
the offsetting.
• Enable instructs the device to offset each printed set.
• Disable instructs the device to stack the sets without offsetting.
Staple Productivity
Productivity can be improved by stapling long edge feed (LEF) documents in the top right corner.
• Enable instructs the device to staple LEF documents in the top right corner.
• Disable instructs the device to staple LEF documents in the top left corner.
ColorQube™ 9201/9202/9203
Administration and Accounting
Device Settings
263