Add Exceptions - Xerox ColorQube 9201 User Manual

Special Pages

Add Exceptions

Use this option to specify the characteristics of any pages in the print job that differ from the settings
used for the majority of the job. For example, your print job may contain 30 pages that print on
standard-sized paper and two pages that print on a different size of paper. Use this option to indicate
these two exception pages and select the alternate paper size to use.
1. To add Exceptions select the Add Exceptions button above the table.
2. Enter the page number the exception programing applies to. If multiple exceptions are required it
is recommended you enter all the page numbers, separated by a comma or enter a page range
separated by a dash.
If individual programing is required for some of the exceptions, the entry can be edited from the
table.
3. Select the Paper requirements for the exceptions.
If Use Job Setting is displayed, the same paper as the main job is used.
4. Select the 2-Sided Printing requirements for the exceptions:
• Use Job Setting uses the same programing applied to the main
job.
• 1-Sided Print prints the exception pages on one side only.
• 2-Sided Print prints the exception pages on both sides of the
sheet of paper with the images printed so the job can be bound
along the long edge of the sheet.
2-Sided Print, Flip on Short Edge prints the exception pages on
•
both sides of the sheet of paper with the images printed so the
job can be bound along the short edge of the sheet.
Job Settings displays the paper requirements specified for the main
job.
5. Select OK to save your selections and exit.
All the exceptions programed display in the table.
6. If any exceptions pages require individual programing, such as a different paper color or a
different number of inserts, select the entry and use the Edit button to change the programing.
140 ColorQube™ 9201/9202/9203
Print