Print Quality Maintenance
There are a number of tasks your device performs automatically to ensure it is running at optimum
print quality:
Automatic Print Quality Maintenance
Your device contains a sub-system that periodically monitors the quality of the image being put on the
drum. This system is known as the Ink On Drum (IOD) system. This system will automatically detect
and correct a number of parameters in order to maintain optimum print quality.
This maintenance routine is automatic and lasts for approximately 60 seconds. The device schedules
this maintenance during 'non use time' which is determined by the Intelligent Ready feature.
Cleaning Pages
If a problem occurs and ink residue remains in the system, the device will run blank sheets through the
paper path to clean the system. This procedure does not require any user intervention, but may take a
few minutes to perform. The cleaning pages will be directed to the top tray and should be discarded.
There are additional troubleshooting tasks which can be performed to fix image quality problems.
Refer to
Image Quality Problems
Cleaning Tasks
WARNING:
When cleaning the device do NOT use organic or strong chemical solvents or aerosol
cleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of children.
WARNING:
Do not use pressurised air-spray cleaning aids on or in this equipment. Some
pressurised air-spray containers contain explosive mixtures and are not suitable for use in electrical
applications. Use of such cleaners can result in a risk of explosion and fire.
Document Glass and Constant Velocity Transport Glass
•
Apply Xerox Cleaning Fluid or Xerox
Anti-Static Cleaner, to a lint-free cloth.
Liquid should never be poured directly
onto the glass.
•
Wipe clean the entire glass area.
on page 301.
ColorQube™ 9201/9202/9203
General Care and Troubleshooting
General Care
295
Need help?
Do you have a question about the ColorQube 9201 and is the answer not in the manual?
Questions and answers