Timers - Xerox ColorQube 9201 User Manual

Device Settings

Timers

Select the Timers option to access the
following settings:
• Auto Resume Timer
• Held Job Timeout
• System Timeout on page 261
Auto Resume Timer
If the device is stopped during a job, this
feature determines if the device
automatically resumes the job after a set
period of time or whether it waits for user
intervention to resume the job. This can
prevent a user leaving the device in a
stopped or paused state.
• Auto Resume is selected to
automatically resume stopped
operations at the time designated.
Select the period of time the device
waits before resuming using the arrow
buttons, between 15 and 120 seconds.
• Wait for User instructs the system to remain stopped until a user selects Resume or Cancel.
Held Job Timeout
Use this option to enable the device to
delete jobs which have been held in the
job list for a specified period of time and
have been abandoned by a user. E-mail,
network scanning, incoming server fax,
embedded fax and internet fax jobs are
not affected by this setting.
• Enable allows the device to
automatically delete held jobs after a
specified period, set the period of
time between 0 and 120 hours and 0
and 59 minutes using the arrow
buttons.
260 ColorQube™ 9201/9202/9203
Administration and Accounting
on page 260
on page 260