Options - Xerox ColorQube 9201 User Manual

Fax from PC Options

Options

On this screen there are 5 fax transmission options that you
may use to customize the transmission of your fax.
Confirmation Sheet
Here you can choose to print a Confirmation Sheet that will
confirm the success or failure of the transmission.
Select Print a Confirmation Sheet using the drop-down
menu.
Send Speed
You can choose one of 3 transmission speeds. Select Send
Speed to select the transmission speed. The options are:
• Super G3 (33.6 Kbps) this is the fastest transmission rate
and is the default setting. This rate minimizes
transmission errors by using Error Correction Mode
(ECM). Initial transmission speed will be 33,600 Bits Per
Second (bps).
• Forced 4800 bps used in areas of low quality communication, when experiencing telephone noise,
or when fax connections are susceptible to errors. 4800 bps is a slower transmission rate but is less
susceptible to errors. In some regional areas, the use of 4800 bps is restricted.
• G3 (14.4Kbps) selects the transmission rate based on the maximum capabilities of the receiving
fax machine. Initial transmission speed will be 14,400 Bits Per Second (bps). This rate minimizes
transmission errors by using Error Correction Mode (ECM).
Fax Resolution
You can choose one of 3 image resolutions depending on the type of documents being sent. The
higher the resolution you choose the better the received image will be but it will take longer to
transmit. The options are:
• Standard (200 x 100 dpi) is recommended for text originals. It requires less communication time
but does not produce the best image quality for graphics and photos.
• Fine (200 x 200 dpi) is recommended for line art and photos. This is the default resolution and
the best choice in most cases.
• Superfine (600 x 600 dpi) is recommended for photos and halftones, or images that have gray
tones. It requires more communication time, but produces the best image quality.
124 ColorQube™ 9201/9202/9203
Fax from PC