Embedded Fax Settings - Xerox ColorQube 9201 User Manual

Service Settings
Auto Image Rotation
The Auto Image Rotation feature
optimizes image output based on the job
settings selected. Disabling Auto Rotation
may result in image loss.
• Use the When Auto R/E Selected
options to instruct the system how to
proceed if the Auto Reduce/Enlarge
feature is selected. Select Auto
Rotate as needed to allow automatic
rotation, or Disable Rotation to
restrict the device from rotating the
image.
• Use the When Auto Paper Selected options to instruct the system how to proceed if Auto Paper is
selected. Select Auto Rotate as needed to allow automatic rotation, or Disable Rotation to
restrict the device from rotating the image.

Embedded Fax Settings

Select the Embedded Fax Settings option
to access the following settings:
• Fax Setup on page 270
• Feature Defaults on page 268
• Fax Country Setting
• Line 1 Setup on page 271
• Line 2 Setup on page 272
• Incoming Fax Defaults
• Transmission Defaults
• Mailbox & Polling Policies
page 275
• Mailbox Setup on page 275
• Setup Fax Reports
• Print Fax Reports on page 276
Fax Setup
Use this setting to Enable or Disable Embedded Fax.
• Enable activates the Embedded Fax service and is selectable from the Services Home screen.
• Disable switches off the service and it is not available for selection.
270 ColorQube™ 9201/9202/9203
Administration and Accounting
on page 271
on page 272
on page 273
on
on page 276