Loading Paper In The Oversized High Capacity Feeder (Ohcf / Trays 6 And 7); Loading Tabs In The Oversized High Capacity Feeder (Ohcf / Trays 6 And 7) - Xerox Versant 80 Press User Manual

Paper and Media
7. Verify the tray and paper settings at the print server.
8. Return the rear skew adjustment lever to its left, default position.
9. Slide the right-side skew adjustment lever toward the front of the paper tray.
10. Gently push in the tray until it comes to a stop.
11. Run your print job.
• The paper is fed accurately without skew and the printed output is satisfactory;
your task is complete.
• The paper is skewed and the printed output is unsatisfactory; proceed to the next
step.
12. Pull out the tray slowly until it stops.
13. Return the right-side skew adjustment lever toward the rear of the paper tray; this is
its default position.
14. Gently push in the tray until it comes to a stop.
Loading Paper in the Oversized High Capacity Feeder (OHCF / Trays
6 and 7)
1. Select the appropriate paper stock for your print/copy job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load paper into the tray.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
The Paper Tray settings/Tray Properties window displays on the UI. You can view
and set stock attributes and verify trays are assigned with the correct stock.
8. From the Paper Tray settings/Tray Properties window, enter or verify the correct paper
information, including size, type, weight and, if necessary, paper curl and/or alignment
option. Select the stock and assign the stock to the tray to be used.
9. Select Confirm or OK to save the information and close the Paper Tray settings/Tray
Properties window.
Loading Tabs in the Oversized High Capacity Feeder (OHCF / Trays
6 and 7)
Refer to the following tips before loading tab stock in the tray:
• You can load either single straight collated or single reverse collated tab stock.
• For network print jobs, refer to your print server customer documentation for
instructions on loading tab stock into a tray.
3-12
® ®
Xerox Versant 80 Press
User Guide