•
If Quick Restart is selected and confirmed the device will restart. Any copy jobs in the job list will
be deleted, print jobs in the job list are recovered.
If Cancel is selected the power down options will be cancelled and the device will be available for
use.
Select Close to exit.
•
Energy Saver Options
The device is designed to be energy efficient and automatically reduces its power consumption after
periods of inactivity. The System Administrator can setup the following Energy Saver options.
Intelligent Ready wakes up and sleeps automatically based on previous usage. The device uses
•
algorithms and data gathered on a usage profile to anticipate periods when the device is likely to
be busy. Using this information it automatically wakes up the device.
•
Job Activated wakes up when activity is detected.
•
Scheduled wakes up and sleeps at set times on a daily basis. The device can be set to wake up
when activity is detected, or a specific time can be entered.
•
Fast Resume reduces the time taken to wake up. This changes the default sleep / low power
timeouts and increases energy usage.
For information about setting up the Energy Saver options, refer to the
General Care
There are a number maintenance tasks which need to be performed to ensure your device performs at
optimum levels:
•
Replenish the Ink Sticks
•
Replace the Cleaning Unit
•
Replace the Staple Cartridges (Office Finisher / High Volume Finisher only)
•
Empty the Waste Ink Tray
•
Empty the Hole Punch Waste Container (Office Finisher / High Volume Finisher only)
•
Print Quality Maintenance
•
Cleaning Tasks.
CAUTION:
When replacing units, DO NOT remove the covers or guards that are fastened with
screws. You cannot maintain or service any of the parts that are behind these covers and guards.
Do NOT attempt any maintenance procedure that is NOT specifically described in the
documentation supplied with your device.
System Administrator Guide.
ColorQube™ 9201/9202/9203
General Care and Troubleshooting
General Care
291
Need help?
Do you have a question about the ColorQube 9201 and is the answer not in the manual?
Questions and answers