Xerox ColorQube 9201 User Manual page 43

Format and Style
Once you have programed the Annotations required, use the following instructions to select the format
and style required:
1. Select the Output Format tab,
Annotations button and then Format
& Style.
2. Specify the appearance of annotated
text:
• Opaque the annotated text is
placed on the copy output with a
white border. No copy text is
visible under the annotated text.
• Transparent the annotated text
is placed on the copy output so
that the copy text is visible under
the annotated text.
3. Use the arrow buttons to enter the
Font Point Size which determines the size of all the annotation options used on your copy output.
4. Use the scroll bar to browse the list of font colors and select the one you require.
5. Select the Side 2 Options from the following selections:
• Same as Side 1 settings chosen will apply to both Side 1 and Side 2 of your output.
• Mirror Side 1 Flip on Horizontal output will open from right to left like a book, with the
binding edge on the left. The position of the annotation on Side 2 will mirror Side 1. For
example, if a page number is positioned in the bottom left corner of Side 1, it will appear in
the bottom right corner of Side 2.
• Mirror Side 1 Flip on Vertical output will open from bottom to top like a calendar, with the
binding edge at the top. The position of the annotation on Side 2 will mirror Side 1. For
example, if a page number is positioned in the bottom left corner of Side 1, it will appear in
the bottom right corner of Side 2.
6. Select Save to save your annotation Format & Style options.
7. Select Save to confirm your selections and run the job.
Output Format
ColorQube™ 9201/9202/9203 43
Copy