Network; Software Reset - Xerox ColorQube 9201 User Manual

Software Reset

Software Reset is faster and wastes less
consumables than switching the device off
then on.
• When instructed by the device to
perform a restart, choose a software
option and then select the Reset
button.
• All Software resets the whole
system software.
Network Software resets the
•
network controller software.
• Copy Software resets the copier software.
Supply Counter Reset
This option is used to reset the counter
when a listed supply is replaced.
• Select the supply and then select
Reset Counter.
• Select Reset to confirm.

Network

The Network options are used to trouble-
shoot problems relating to the network
connection.
Echo Test
The Echo Test allows you to test the
network connectivity.
• Select the appropriate protocol and
select the Start Test button to run the
echo test.
• TCP/IP
• AppleTalk
• Novell or IPX
Troubleshooting
ColorQube™ 9201/9202/9203
Administration and Accounting
285