Delay Send - Xerox ColorQube 9201 User Manual

G3 (14.4 Kbps)
• Selects the transmission rate based on the maximum capabilities of the receiving fax machine.
• Initial transmission speed is 14,400 Bits Per Second (bps). This rate minimizes transmission errors
by using Error Correction Mode (ECM).
Forced (4800 bps)
• Used in areas of low quality communication, when experiencing telephone noise, or when fax
connections are susceptible to errors.
• Forced 4800 bps is a slower transmission rate but is less susceptible to errors. In some regional
areas the use of Forced 4800 bps is restricted.
Select Save to save your selections and exit.

Delay Send

Select Delay Send to specify the time within the next 24 hours that you want the fax to be
transmitted. Use this feature to transmit faxes during off-peak hours or when sending to another
country or time zone. Delay Send can also be used with Mailbox and Polling options.
The options are:
Specified Time
Select Specified Time and select
•
either the Hour or the Minute field to
enter a time to send your fax.
• Use the arrow buttons or numeric
keypad to enter the hours and
minutes.
• If the device is set up to display the
time using a 12 hour clock, you must
also select either the AM or PM
button.
• Select Save to save your selections
and exit.
The fax will be stored in memory and sent at the specified time.
ColorQube™ 9201/9202/9203
Fax Options
71
Fax