Booklet Creation - Xerox ColorQube 9201 User Manual

Output Format

Booklet Creation

Booklet Creation enables the production of booklets from 1 or 2 sided originals. The device will scan
your originals and automatically reduce and arrange the images in the correct sequence on your
selected copy paper, so that a booklet is created when the copy set is folded in half.
A cover can be inserted onto the booklet automatically
by selecting the Special Pages option from the Output
Format tab.
If your device is fitted with the High Volume Finisher
with Booklet Maker you can use the Booklet Creation
feature to automatically produce folded and stapled
booklets. The following Booklet Maker specifications
apply:
• Paper Sizes A3, 11x17", A4, 8.5x11", 8.5x13" and
8.5x14".
• All media must be Short Edge Feed (SEF).
• Booklet thickness:
• For Folded and Stapled booklets a maximum of 15 sheets of 80 gsm (20 lb) or equivalent
thickness. For example you can have 13 sheets of 80 gsm (20 lb) and a cover sheet of
160 gsm (43 lb).
• For Folded Only booklets a maximum of 5 sheets of 80 gsm (20 lb) or equivalent thickness.
For example you can have 3 sheets of 80 gsm (20 lb) and a cover sheet of 200 gsm (53 lb).
Refer to Finishing Devices
To create a booklet:
Select Booklet Creation and On.
1.
Note: Booklet Creation is not available if Auto Paper is selected. Select an alternative Paper
Supply option.
2. Select the Paper Supply button and
select the tray that contains the paper
you want to use.
If using the High Volume Finisher with
Booklet Maker to fold and staple your
output, a Short Edge Feed (SEF) Paper
Supply must be selected.
32 ColorQube™ 9201/9202/9203
Copy
on page 23 for more information.