2-Sided Copying; Copy Output - Xerox ColorQube 9201 User Manual

Copy Options

2-Sided Copying

The device provides options to make one or two-sided copies from one or two-sided originals using
either the document feeder or the document glass. The options are:
• 1>1 Sided use this option if your
originals are printed on one side and
you want single-sided copies.
• 1>2 Sided use this option if your
originals are printed on one side and
you want 2-sided copies. You can also
select the Rotate Side 2 button to
have the second page rotated 180
• 2>2 Sided use this option if you want
to make two sided copies from two-
sided originals. You can also select the
Rotate Side 2 button to have the second page rotated 180
• 2>1 Sided this option will make one-sided copies from two-sided originals.
Note: If using the document glass to scan originals, the device displays a message when ready to
scan side 2.

Copy Output

The most commonly used Copy Output options are selected directly from the Copy tab. The options
available are dependent on the finishing device and kits installed. Refer to
page 23.
• Collated sorts your copies into sets
1,2,3 1,2,3 1,2,3.
• Uncollated sorts your copies into
stacks 1,1,1 2,2,2 3,3,3.
• 1 Staple (Portrait) staple will be
positioned in one of the short edge
corners depending on how the
originals are loaded.
• 1 Staple (Landscape) the staple will
be positioned in one of the long edge
corners, depending on how the
originals are loaded.
Folding a new window opens providing access to the folding options. Refer to
•
• Use More... to access additional output options.
For information about the Staple options, refer to
For information about Hole Punch options, refer to
20 ColorQube™ 9201/9202/9203
Copy
o
.
Stapling Options
Hole Punching
o
.
Finishing Devices
Folding
on page 21.
on page 22.
on
on page 22.