Finishing Devices - Xerox ColorQube 9201 User Manual

Finishing Devices

Your device is equipped with one of the following finishing devices:.
High Volume Finisher: The High Volume Finisher
1
has a comprehensive range of finishing options. It
collates, offsets, stacks and staples your output.
The top tray can receive up to 250 sheets of paper
and the stacker tray up to 3000 sheets of paper.
This finisher can be fitted with the optional 2, 3 or
4 Hole-Punch kit and the Tray 6 (Post Process
Inserter) kit.
Booklet Maker: The High Volume Finisher is also
2
available with a Booklet Maker which enables
booklets to be folded and stapled. Folded sheets
and booklets are delivered to the booklet tray
which can hold between 10 and 30 booklets,
depending upon the number of pages. If the flap
on the right of the tray is folded down, an
unlimited number of booklets can be collected in a
suitable container.
Tri-fold Module: If you have a High Volume
3
Finisher with Booklet Maker, a Tri-fold module can
also be fitted. This enables your device to tri-fold
booklets. With the Tri-fold module fitted, the
capacity of the finisher stacker tray is reduced to
2000 sheets. Refer to
information about the folding options.
Note: Thick stacks of paper can be removed from your finisher
more easily by using the pause function. Press the button as
shown to lower the stacker tray to a more convenient height.
Then press the button again to return the stacker tray to normal
height. Alternatively, it automatically resets after 30 seconds.
4
Folding on page 22 for
1
2
3
Tray 6 (Post Process Inserter): This optional
4
accessory is a feeder that sits on top of the finisher
unit. It enables pre-printed sheets to be inserted
into sets created by your device. The inserted
sheets do not go through the copy or print process
in the device. For more information about using
Tray 6 (Inserter) refer to the
guide.
Office Finisher: This finisher is capable of receiving
5
up to 250 sheets of paper in the top tray and up to
2000 sheets of paper in the stacker tray. The Office
Finisher can be fitted with the optional 2, 3 or 4
Hole-Punch Kit.
Offsetting Catch Tray (OCT): The Offsetting
6
Catch Tray holds up to 500 sheets of 80 gsm (20
lb) paper and is located on the right-hand side of
the device.
ColorQube™ 9201/9202/9203
Copy Options
5
6
Paper and Media
23
Copy