Xerox ColorQube 9201 User Manual page 18

Copy Options
• Use the - / + buttons
Copy screen to select the required
reduction or enlargement percentage.
• Alternatively, select the ratio button
and use the numeric keypad to
type in the ratio required.
• Set the ratio window to 100% if you
want your output image to be the
same size as your original.
Proportional %
Selections made on this screen will reduce
or enlarge the image by the same ratio in
both directions so that the image gets
bigger or smaller, but the proportions
remain the same.
• Select the Variable % button
and use the numeric keypad or the
arrow buttons to enter the ratio
required.
• Use the Preset buttons to select
100%, Auto % or commonly used
ratios which can be set up by your Administrator. The selected proportional ratios in percentages
are shown next to the button, together with an example application.
When Auto % is selected, the device chooses the best ratio to reduce or enlarge the original onto
the selected paper size. You must specify a paper tray before using this option.
Independent X-Y%
This selection enables you to set different
reduction or enlargement ratios for the
X (width) and the Y (height) of the image.
This will produce a distorted copy of your
original.
• Select the Variable X-Y% buttons
and use the numeric keypad or
the arrow buttons to enter the Width
- X% and Length - Y% ratios required.
18 ColorQube™ 9201/9202/9203
Copy
on the