Energy Saver; Date & Time - Xerox ColorQube 9201 User Manual

Device Settings

Energy Saver

The device is designed to be energy
efficient and automatically reduces its
power consumption after periods of
inactivity. This utility enables the
Administrator to modify the time the
device spends between standby, low power
and sleep modes.
• Intelligent Ready wakes up and
sleeps automatically based on
previous usage.
• Job Activated wakes up when activity
is detected.
• Scheduled wakes up and sleeps at set times on a daily basis. Select Scheduled Settings to
program the setting for each day.
• Activity is selected if the device is required to wake up when activity is detected.
• Time is selected if a specific Warm up Time and Energy Saver Time is required. Select the
time required for each option using the scroll bar.
• Fast Resume reduces the time taken to wake up. This changes the default sleep / low power
timeouts and increases energy usage.
Date & Time
Some features and functions on the device
require the local date and time, such as
Delayed Send or the Configuration sheet.
This utility enables you to set and change
the local date and time on the device.
• GMT Offset (Time Zone) Use this
option to set the difference between
your local time and Greenwich Mean
Time. Enter the GMT Offset time
between -12.0 and +14.0 hours using
the arrow buttons.
• Date select the Format required and enter the Month, Day and Year.
• Time enter the correct Hour and Minute and select PM or AM. If a 24 hour clock is required, select
the Display 24 hour clock option and enter the Hour and Minute using the 24 hour clock format.
• Select Reboot to save and reboot the device, or Cancel to exit without saving.
254 ColorQube™ 9201/9202/9203
Administration and Accounting