Paper/Output
Hole Punching
•
Select Hole Punch to punch the paper.
•
Select No Hole Punching to switch off hole punching.
Note:
The number of holes punched and their location depend on the hole punch unit in the
finisher.
Folding
•
Bi Fold folds the output in the middle, creating two sides.
•
C Tri Fold folds the output to create three sides, with the outer flap folded over the inner flap.
•
Z Tri Fold folds the output to create three sides in a Z effect.
Select No Folding to switch off folding.
•
Booklet Creation
Select this menu item to display the Booklet Creation screen
to select booklet layout and booklet finishing options.
Booklet Finishing
•
Select Booklet Fold to fold the booklet
•
Select Booklet Fold and Staple to staple the booklet in
the center and then fold.
Booklet Layout
•
Using the option, the document pages are rearranged
into the correct sequence to create the booklet.
•
Use Print Page Borders to place a border around the
images or text on each page.
Booklet Paper Size
•
Use Automatically Select to enable the printer to select
the paper size for the job.
•
To select a paper size for the job, deselect the checkbox and use the drop-down menu.
Gutter
•
Use this option to shift the images to create a center margin for the booklet.
•
This option provides space for the booklet center fold.
•
Specify the horizontal distance (in points) between the page images. (A point is 1/72" or .35 mm.)
136
ColorQube™ 9201/9202/9203
Print