Xerox ColorQube 9201 User Manual page 271

Feature Defaults
Use to select the default settings for each
programing feature within the Embedded
Fax service.
• Select the default required for each
feature in each of the programing
tabs.
• Select Save Defaults. The settings
selected become the default settings
for each fax job.
• A confirmation screen is displayed,
select Done to return to the previous
screen.
Fax Country Setting
Use this option to select the country the
device is located in.
• Select the Country required from the
options shown.
Line 1 Setup
The standard fax option supports one
analogue telephone line. If the Extended
Fax option is installed the device can
support two analogue fax lines. This option
enables you to set up Line 1.
• Fax Number is the number of the
phone line your system is attached to.
Enter the number for Line 1 using the
numeric keypad.
• Line Name is a friendly name to
logically identify the system. Enter the
name using the keyboard provided. Use the backspace key to delete an incorrect character, or use
Delete Text to delete the entire entry. Select Save.
• Options determine whether the line is able to Send and Receive, Send Only or Receive Only.
Select the required option for the fax line.
Service Settings
ColorQube™ 9201/9202/9203
Administration and Accounting
271