Xerox ColorQube 9201 User Manual page 34

Output Format
• Exceptions are used to program pages that require printing on a different media to the rest of
your job. Refer to
Note: When identifying the page number to enter for Chapter Starts, Inserts and Exceptions,
count each side as a separate page if scanning a 2-sided document.
Covers
Use the following instructions to program Covers:
1. On the Copy tab, select the paper you
want to use for the main body of the
copies.
Note: Special Pages is not available if
Auto Paper is selected.
2. If required, load special media into another paper tray ensuring that it is in the same orientation
as the paper you are using for the body of your copies.
Update the Paper Settings screen and Confirm your selections.
3. Select the Output Format tab,
Special Pages button and then
Covers.
4. Select the Covers Option required:
• Front & Back Same is used if the
same media and printing options
are required for both covers.
• Front & Back Different is used
for front and back covers with
different programing
requirements.
• Front Cover Only is used if only a
front cover is required.
• Back Cover Only is used if only a
back cover is required.
34 ColorQube™ 9201/9202/9203
Copy
Exceptions on page 37.