Image Shift; Edge Erase - Xerox ColorQube 9201 User Manual

Layout Adjustment

Image Shift

Image Shift allows you to move the position of the image on the output page. The options are:
• Auto Center automatically centers the scanned image on the output paper. To work effectively,
the original should be smaller than the selected output media or alternatively, the image should
be reduced.
• Margin Shift moves the image up /
down or left / right on the page to
give a bigger or smaller top and left
margin. Enter the shift required by
selecting a field or use the arrow
buttons.
Shift is entered in 1 mm (0.1")
increments up to 50 mm (2.0").
When copying 2-sided there are two
options:
• Adjust the margin of side two
independently of side one.
• Create a mirror image of side one to provide a binding margin.
• Presets provide access to commonly used shift settings and are customized by the System
Administrator using Tools.

Edge Erase

Edge Erase enables you to specify how much of the image to erase around the edges of your
document. For example, you can remove the marks caused by punched holes or staples in your original.
The options are:
• All Edges is used to erase an equal amount from all the edges. Use the arrow buttons to adjust the
amount to be erased from 1 mm to 50 mm (0.1" to 2.0"). All marks or defects within the
measurement set are deleted.
• Individual Edges enables an individual amount to be erased from each of the edges, on both the
first and second sides.
Use the arrow buttons to adjust the
amount for each edge, from 1 mm to
50 mm (0.1" to 2.0").
• Mirror Side 1 can be selected to erase
exactly the same amount on the
Side 2 image as selected for Side 1.
Presets provide access to commonly
•
used erase settings and are
customized by the System
Administrator using Tools.
30 ColorQube™ 9201/9202/9203
Copy