Setting System Date And/Or Time - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Setting System Date and/or Time

To print system programming reports, use one of the following procedures:
Console Procedure:
PC Procedure
NOTE:
The Extension Information report incorrectly lists MLX-16DP telephones as MLX-
28D telephones. If you have MLX-16DP telephones in your system, keep a
separate log of the extension numbers.
Setting System Date and/or Time
Use this procedure to change the system date and/or time. These must be set
correctly. System time affects the functioning of several system features and
applications, including Automatic Backup, Night Service, SMDR reports,
standalone auto attendant systems, voice mail, and Reminder Service.
NOTE:
Be sure to change the system time appropriately when Daylight Savings Time
starts and when it ends.
Planning Guidelines
If you change the system time while the system is in Night Service mode, Night
Service is deactivated and must be manually reactivated.
6–36
Managing the System
To print trunk information:
More
To print extension information:
More More
number
To print all other reports:
More Select report
To print trunk information:
u 3 6
Select trunk type
To print extension information:
u 3 u 0
0 5
To print all other reports:
u 3
Select report
To save report on disk:
u 3
Select report
from below console simulation screen
To view report:
C + 8
Select trunk type
Dial extension
5
Type extension number
5
0
select
0