Backing Up The System - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Backing Up the System

If you have installed applications such as Call Management System (CMS) or
AUDIX Voice Power, you may need to set the time in the applications software
whenever you reset the system time.
Valid Entries
For date:
Month: 01 to 12
Day: 01 to 31
Year: 00 to 99
For time: 0000 to 2359
Task List: Setting System Date and/or Time
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Set System Date"
or "Set System Time" in the "Basic System Operating Conditions" section
in Chapter 3 of System Programming , or the summary programming
instructions below.
Programming Instructions
Console Procedure:
PC Procedure:
Backing Up the System
Use this procedure to make a copy of your customized system data. You should
create a backup once after each system upgrade, service technician visit, or
major system reconfiguration.
The backup does not copy any application data. For information about
application backup, see the documentation for the application.
The backup is performed using the Translation memory card (white label).
For information about the Restore procedure, see Chapter 4, "Advanced
Programming Procedures," in System Programming .
or
date or time
1 7 or 8 A + P Type current date
0 5
or time
Drop Dial current
Managing the System
6–37