Changing Extension Directory Labels - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Changing Extension Directory Labels

Plan changes using the planning guidelines above; record the new
values on Form 9a.
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Night Service
Group Assignment" in the "Labeling" section of System Programming ,
Chapter 3, or the summary programming instructions below.
When you have finished, file Form 9a with the rest of the planning forms.
Programming Instructions
Console Procedures:
PC Procedures:
Changing Extension Directory Labels
Use this procedure for either of the following purposes:
To change the alphanumeric system labels so that display telephone
users can identify the co-worker who is calling or leaving a message
To program the Extension Directory feature for MLX telephones
NOTE:
If your system has Integrated Solution III (IS III), use IS III to perform this task.
6–70
Managing the System
To assign a calling group to a Night Service group:
ext. no. of Night Service attendant
calling group no.
To assign an extension to a Night Service group:
no. of Night Service attendant
of telephone
To assign a calling group to a Night Service group:
0 1 2
Type ext. no. of Night Service
0
attendant Type calling group no.
5 5
To assign an extension to a Night Service group:
0 1 1
Type ext. no. of Night Service
0
attendant Type ext. no. of telephone
5 5
Dial
Dial
Dial ext.
Dial ext. no.
0
0