AT&T MERLIN LEGEND Release 3.1 System Manager's Manual page 312

System Guides Information Finder
Table 7–2, Continued
To Learn About These Features . . .
Planning and Programming Features (continued)
Finding out which system planning forms to change
when you modify or add features
Finding out which modes of operation in support a
systemwide feature
Programming special characters (Pause,
Stop, and others) in dialing sequences
Finding out which modes a feature is supported in and
which type of phone it works on
Maintenance and Troubleshooting
Finding out which system planning forms to consult in
order to see how features are programmed on your
system
Troubleshooting a feature when it doesn't work as
expected
Finding out how features interact with applications
Finding out about system reports that offer details
about a feature as it is used on your system
Finding out how features interact with one another
Canceling Reminder Service calls
Changing Recall timer when the switchhook, Recall or
Flash buttons are disconnecting callers
Security
Setting up authorization codes
Setting up Remote Access barrier codes
Changing Automatic Route Selection (ARS) Facility
Restriction Levels for extensions or lines/trunks
7–16
Learning More
Check This Guide . . .
Feature Reference , Appendix B
System Programming. Entry for procedure
you are using.
Feature Reference, Appendix C
Feature Reference, Appendix H
System Programming, Appendix D
Feature Reference , Appendix B
Feature Reference. Under feature entry,
see "Considerations and Constraints" and
"Feature Interactions."
Feature Reference , Appendix I
Feature Reference. See entry for feature
and Appendix F.
System Programming , Appendix F
Feature Reference. Under feature entry,
see "Feature Interactions."
System Programming, Chapter 4
System Programming, Chapter 4
Feature Reference. See "Recall/Timed
Flash."
Feature Reference . See "Authorization
Codes."
System Programming , Chapter 3
Feature Reference . See "Remote Access."
System Programming , Chapter 4
System Programming, Chapter 4
Feature Reference. See "Automatic Route
Selection."
Continued on next page