Changing System Directory Labels - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Changing System Directory Labels

Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for " Group Calling" in
the "Labeling" section of System Programming , Chapter 3, or the
summary programming instructions below.
When you have finished, file Form 7d with the rest of the planning forms.
Programming Instructions
Console Procedure:
PC Procedure:
Changing System Directory Labels
Use this procedure to change System Speed Dial numbers for all system users.
You can also use this procedure to enter the alphanumeric labels shown on the
System Directory feature of MLX display telephones.
To program on the system programming console:
Use the buttons next to the display and line/feature buttons to specify
alphanumeric characters and punctuation for labels. Use the template provided
with the MLX-20L telephone to see which line buttons correspond to which
alphanumeric characters.
To program with SPM:
Use the PC keyboard for labels. All letters appear on the screen in uppercase.
Planning Guidelines
Valid Entries
Speed dial code assignments are 600 through 729.
There can be a total of 130 numbers, with a maximum of 11 characters per
label.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes ('),
stars (*), and pound signs (#).
More
group ext. no.
u 1 4 Type calling group ext. no.
0 A + PType label 6 5 5
Dial calling
Drop Enter label
Managing the System
6–75