Mlx-20L Telephone With Direct Station Selector (Dss); Console Buttons - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Programming from the Console
NOTE:
This jack is also factory set as an operator position. You can change the system
programming jack to any one of the first five jacks on the first MLX module. This
allows you to program without interfering with the operator's call handling.
However, if you change the programming jack to other than the first or fifth jack
on a 008 MLX or 408 GS/LS-MLX module, then you cannot attach a Direct
Station Selector (DSS) to the console.
You can also have one or two DSSs connected to the system programming
console. Each DSS adds 50 extension buttons to the console, which facilitates
assigning features to telephones.
Figure 6–7 shows an MLX-20L telephone with a DSS.
Handset
Button
Labeling
Cards (2)
Line Buttons (20)
Console Light
Figure 6–7. MLX-20L Telephone with Direct Station Selector (DSS)

Console Buttons

You can use the 14 buttons located on either side of the console display screen
for system programming. These buttons are arranged in two columns of seven
buttons, as shown in Figure 6–8.
Display Buttons
Display Screen
MLX-20L
More
Home
Menu Inspct
Message
v v
Volume ABC DEF
1 2 3
Feature Transfer MNO
GHI JKL
4 5 6
HFAI
Conf
PQRS TUV WXYZ
7 8 9
Mute Drop
OPER #
Speaker Hold
0
*
Volume Control
Fixed Feature Buttons (8)
User Cards and Tray
DSS Light
Direct
Station Selector
(DSS)
DSS
00 10 20 30 40
01 11 21 31 41
02 12 22 32
42
03 13 23 33 43
04 14 24 34 44
05 15 25 35 45
06 16 26 36 46
07 17 27 37
47
28
08 18 38 48
09 19 29 39
49
Message Light
Dialpad
Managing the System
6–13