Moving An Extension - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Moving an Extension

Program the features following the instructions for each feature in
"Optional Telephone Features," "Optional Group Features," and "System
Features" in System Programming , Chapter 3, or in Chapter 5,
"Centralized Telephone Programming" of System Programming .
When you have finished, file the form(s) with the rest of the planning
forms.
Programming Instructions
See the appropriate procedures in System Programming as noted in the task list
above.
Moving an Extension
Use this procedure to move an extension in your system.
Planning Guidelines
There are three ways to move an extension:
Call AT&T at 1 800 247-7000. They will arrange for an AT&T technician to
do it for you at your site.
If you have remote maintenance and administration as part of your
maintenance contract, call the AT&T Helpline at 1 800 628-2888. They
will determine if it can be done remotely. If possible, they will do it
remotely for you. If not (for example, if additional ports are required), you
will be instructed to call the 1 800 247-7000 number for service. If you do
not have this coverage in your contract and are interested in adding it,
contact your AT&T representative.
Follow the procedure in this section.
If the extension is not wired or is wired but not connected to the system, or if
you're not sure, you must call AT&T at 1 800 247-7000 to arrange for this to be
checked or completed.
Task List: Moving an Extension
Obtain Form 2a, System Numbering: Extension Jacks.
Renumber the extension(s) and record the changes on Form 2a. If you
are switching two extensions (for example, Extension 303 and Extension
306) because two people are trading offices, you would renumber as
follows:
303 --> 7103 (the default; to free up 303)
Managing the System
6–41