Removing An Extension - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Removing an Extension

306 --> 303
7103 (the original 303) --> 306
NOTE:
Renumbering changes the extension number, but the programming of
the extension stays the same. Therefore, for the new Extensions 303 and
306 in the example above, each still has its original programming, even
though it has a new extension number. This programming includes
Extension Directory labels, Personal Speed Dial, button assignments, and
group-assigned features like Coverage, Pickup, paging, and Night
Service. If you need to change the programming for the extension, you
must perform the next task.
If necessary, program the extension that was moved for the appropriate
features and buttons as described in "Adding an Extension," earlier in
this chapter. Remember to record everything on the appropriate form(s).
When you have finished, file the form(s) with the rest of the planning
forms.
Programming Instructions
See "Adding an Extension," earlier in this chapter.
Removing an Extension
Use this procedure to remove an extension.
Planning Guidelines
When you remove an extension, you need to remove it from any groups and lists
to which it is assigned, for example, Allowed Lists, calling restrictions,
Coverage, calling group, Pickup group, paging group, and/or Night Service.
Task List: Removing an Extension
Obtain Form 2a, System Numbering: Extension Jacks. Also obtain any
relevant forms, including group-assigned feature forms (for example, 7c,
Group Coverage) and Forms for the individual telephone (for example,
4d, MLX Telephone). Appendix D of this guide includes a list of the
planning forms.
Open the System Programming menu from the console or a PC with SPM.
6–42
Managing the System