Set Time And Date - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide

Set Time and Date

You can set the system time and date using a Deskset. To set the system time and date
from the WebUI, see
To set the System time and date:
1. On the Admin Settings menu, press 6 to display the screen shown below.
2. Press
Network Time Protocol (NTP) Server (recommended) or you can set the time and date
manually.
If you select NTP Server, the manual time and date settings disappear from the
screen. Ensure that you have configured the NTP Server on the WebUI. See
"Changing the System Basic Settings" on page
3. If you select Manual, use the dial-pad keys and press
manually set the Date, Time, Time Zone and Daylight Savings.
4. Press
Device Configuration
"Changing the System Basic Settings" on page
 
to select the Clock source. You can set the system time to follow a
or
to return to the Admin Settings menu.
Save
30.

83
Back to Contents
30.
  
or and or to