Centralized Telephone Programming - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Centralized Telephone Programming

Console/Display Instructions
5 Type the remote access password to display the SPM Main Menu shown in
Step 6.
The password does not display when you type it.
6 To reach the System Programming menu, select System Programming by
pressing 1 1 .
1
2
3
4
5
NOTE:
The function keys shown on either side of the display are included here for quick
reference. On the PC screen these do not look like actual keys.
7 Perform the procedures contained in the task descriptions later in this chapter.
Centralized Telephone Programming
Centralized telephone programming allows you, as the system manager, to
program the following:
Any feature that can be programmed by individual telephone users or by
operators. Certain features can be copied from one extension to another
in the system.
Certain features that can be programmed only by using centralized
programming:
— Barge-In
— Headset Hang Up
— Intercom buttons: all types (Key and Behind Switch mode only)
— System Access buttons: all types (Hybrid/PBX only)
6–22
Managing the System
Additional Information
6
7
8
9
0