Data Entry Screen; Data Entry Screens; System Programming Menu - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Introduction to System Programming

Data Entry Screens

A data entry screen prompts you to enter specific data or to make specific
choices. If data is currently programmed for the feature, it appears on the
screen. Many screens also show data entered on a previous screen, such as an
extension or trunk number.
Data entry screens may also contain menu selections. Instead of entering data
from the dialpad, you select options on the screen, such as
or disable a feature. To select this type of option, you press the unlabeled
display button next to the option name or the function key that corresponds to
the option name. Then your selection is either highlighted or inserted in the
screen title. To program or save the highlighted selection, you press the
unlabeled display button next to
NOTE:
You can use the Inspect feature to view, verify, or check the entries you save:
press the Inspct fixed display button on the console or press d on the PC.
After you have finished inspecting the entries, you can return to the previous
screen by pressing the unlabeled display button next to
on the PC. See System Programming for more information about the Inspect
feature.
Figure 6 3 shows a data entry screen with the first (of two) required extension
numbers needed to assign analog voice and data.
Figure 6–3. Data Entry Screen

System Programming Menu

Figure 6–4 shows the two screens that make up the System Programming menu.
This is the main menu of system features and options. You reach the System
Programming menu by selecting
Table 6–2 lists the System Programming menu options and describes each one.
(0 on the PC).
Selected Option
Prompt
Extension entered
from the system's main menu.
Managing the System
or , to enable
or by pressing 5
6–7