Copying Line/Trunk Button Assignments - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Centralized Telephone Programming
Console/Display Instructions
3 Save your entry.
Select .
4 Specify the number of the extension to which you want to copy programmed
features or SA or ICOM buttons.
xxxx
nnnn
5 Continue to copy line assignments and programmed features from the copy
extension shown to another extension or go to Step 7.
6 Return to the Centralized Programming menu.
Select .
7 Save your entry.
Select .
8 Return to the Centralized Programming menu.
Select .

Copying Line/Trunk Button Assignments

Use this procedure to copy outside line/trunk button assignments, pool dial-out
code restrictions (Hybrid/PBX only), and Night Service information (for operator
positions only). You can copy from one extension to another or to a block of
extensions with identical requirements. Use system programming for this
procedure.
Additional Information
xxxx = extension entered in Step 2
Dial or type [ nnnn ].
Select to continue copying
line assignments from the
extension currently displayed on
Line 1 to additional extensions.
Select if the extension numbers to be
copied to are sequential. Select
(0) after completing programming.
Return to Step 4 to continue programming. The
extension to be copied from will be displayed on
Line 1.
Managing the System
PC
0
5
0
5
6–31