Table of Contents
Advertisement
Rate Control
Rate control is a form of flow control used to enforce a strict bandwidth limit of a port. You can program
separate transmitting (Egress Rule) and receiving (Ingress Rule) rate limits for each port, and even apply the
limit to certain packet types as described below.
Rate Control Page
You can select the packet type that you want to filter. The Ingress packet types
supported are:
•
Ingress
•
Packet Type
•
•
The Egress rate supports all types of packets.
These columns allow you to manually assign the limit rate of the port. Valid values
Ingress/
support 128Kbps, 256Kbps, 512Kbps, 1024Kbps, 2048Kbps, 4096Kbps, and
Egress Rate
8192Kbps.
Click Apply to apply the settings.
Apply
Note: You must Save the settings
RocketLinx ES7506 User Guide: 2000529 Rev. F
Broadcast/Multicast/Unknown Unicast
Broadcast/Multicast
Broadcast
All
if the ES7506 is powered off.
Configuration Using the Web Interface
(Page
93), if you want to maintain these settings
Rate Control - 61
Advertisement
Table of Contents
