Restoring Factory Defaults (Specific Models) - Comtrol DeviceMaster DM-2000 Series Installation And Configuration Manual

5. If a higher version of SocketServer is available and you want to update the DeviceMaster with the latest
software:
a. Update SocketServer using
b. Download the latest driver from http://downloads.comtrol.com/dev_mstr/rts/drivers/win7.
c. Update to the latest driver using the
downloaded using

Restoring Factory Defaults (Specific Models)

Use the following procedures to restore the DeviceMaster DIN rail models to the factory defaults.
To return to default port settings, see
Note: For other models, see
If Technical Support advises you to restore the DeviceMaster factory defaults, depress the Reset/Restore switch
for greater than 5 seconds.
Restoring the DeviceMaster DIN rail models resets the following to their factory defaults:
• Port settings
• Network settings
• Password
• Telnet enable
• Start up time-out
• SSL enable
• Telnet time-out
DeviceMaster Installation and Configuration Guide: 2000594 Rev. F
Uploading SocketServer with PortVision DX
DeviceMaster Device Driver (NS-Link) User Guide,
Locating Software and Documentation
Restoring Serial Port Settings
Returning the DeviceMaster to Factory Defaults
Managing the DeviceMaster
on Page 42.
on Page 11.
on Page 120.
on Page 171.
Managing the DeviceMaster - 119
which can be