Changing Forwarding And Static Database Entries - Cabletron Systems 7C03 User Manual

Using the 7C0x SmartSwitch Bridge View

Changing Forwarding and Static Database Entries

The only entries that can be changed or deleted in the Filtering Database are static
entries. If the entry you wish to change or delete is a forwarding entry, you must
add it to the Static Table. The Static Table
forwarding entry to a static or permanent entry, or make changes to existing static
entries. To open the Static Table window:
1. Open the Filtering Database window by clicking on the Front Panel
2. If the Filtering Database window displays Forwarding entries, highlight the
It is also possible to open the Static Table in either case without highlighting an entry, by
clicking on the Add To Static Table button. The static address field will appear blank.
NOTE
Enter the MAC address that you want to add to the Static Table.
6-18
button; drag down to Filtering Database to display the Filtering Database
window.
entry you want to change and click on the Add to Static Table button.
or
If the Filtering Database window displays Static entries, highlight an entry and
click on the Change button.
Figure 6-9. Static Table Window
(Figure 6-9) is used to change a
The Filtering Database Window