3.
Click on Select. A screen similar to the following will be displayed:
To complete the IP network system configuration, you need to configure:
•
IP Network System Properties
•
IP Network System Interfaces
•
IP Network System Static Routes
C
IP N
ONFIGURING
ETWORK
To configure IP network system Properties:
1.
As the above screen shows, the Site Name and System ID are preconfigured. These parameter
values are taken from site information entered earlier.
2.
You may enable or disable IP routing on a per system basis.
3.
You may select to use a WAN UnNumbered Interface for this system.
S
P
YSTEM
ROPERTIES
C
IP N
ONFIGURING
ETWORK
Configuring IP Network Systems Information
SFVRA Configuration Manager
I
NFORMATION
113